Machinery

Shini

  • Hopper Loaders, Self-contained [Shini]

    Self-contained SAL-330 / 360 series adopt single phase carbon brush motor with superior suction power and easy installation. It is particularly suitable for conveying new materials. SAL-430 / 460 series use a three phase inductive motor with low nois...
    more info
  • Hopper Loaders, Separate Vacuum [Shini]

    SAL-G series “Standard” separate-vacuum hopper loaders are suitable for conveying material over long distance. SAL-700G/800G/800G2 are for one to one combination, while SAL-900G/900G2 are for one to two combination. All models adopt stainless steel h...
    more info
  • Water Chillers [Shini]

    SIC-W/A series are applicable for cooling moulds which reduce products molding cycle, also they are available in the cooling of equipments in order to maintain a normal temperature. Besides, they are suitable for other industries in the need of cooli...
    more info
  • Conveyors [Shini]

    Shini manufactures five types of belt conveyor as follows under technical license from a leading european manufacturer. PNL series conveyors feature reliable performance and ease of operation and are suitable for use with CB or SV series conveying or...
    more info
  • Dehumidifiers [Shini]

    SD-H series honeycomb dehumidifiers are mainly used to dry hygroscopic engineering plastics. A honeycomb-rotor is used to offer effective drying, which under ideal conditions, can supply dehumidified dry air with a dew-point lower than -40?.This seri...
    more info
  • Gravimetric Blenders [Shini]

    SGB series gravimetric blenders can be used in the fields of injection moulding machines, blow moulding machines and extrusion lines for proportionally precise mixing of several types of material. This series machines adopt SIEMENS PLC controller and...
    more info
  • Hopper Dryers [Shini]

    SHD series “Standard” hopper dryers offer an effective and low-cost method for plastic material drying. Hot air is used to dry wet materials that due to moisture absorption during packaging, transportation, and recycling cycles. They can be directly ...
    more info
  • Material Mixing and Blending [Shini]

    To achieve the aim of mixing material, screw blades are used to generate vortex. Materials are sucked towards mixing screws at the center of hopper bottom by vortex, then materials whirl upward to the top and fall down so that the evenly mixing can b...
    more info
  • Mould Temperature Controllers [Shini]

    STM series oil heaters have both the standard and high temperature models, which are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature oil from the mould is returned to the c...
    more info
  • Proportional Valves [Shini]

    SPV-U series proportional valves mix regrind and new materials in a proper proportion, and then send them back to the moulding machine to achieve a proportional mixing and loading effect. It features directly mounted on loaders or mounted on the pipe...
    more info
  • Robotics and Automation Equipment [Shini]

    The SS series robot is designed for rapid and precise removal of sprue or runner from injection moulding machine, and place them into granulator for recycling. Simple product removal is applicable with optional vacuum generator and EOAT. Suitable for...
    more info
  • Venturi Loaders [Shini]

    VL series venturi loaders use fast flowing pressurized air to create a vacuum that is used to convey various plastic granules. Air pressure is around 6~8kgf/cm2.Features European Type appearance , compact in size and light-weighted. Stainless stee...
    more info
  • Volumetric Colour Dosers [Shini]

    SCM series volumetric dosers are suitable for auto-proportional mixing of virgin materials, regrinds, master- batch or additives. A gear motor with gear ratio of 38 : 1 or 75:1 is coupled to a dosing screw of 12, 14 or 16mm diameter to give a total o...
    more info
  • Water Chillers, Central Air-cooled [Shini]

    SICC-A series are applicable for cooling moulds to reduce products moulding cycle, also they are available in the cooling of equipment in order to maintain a normal temperature. Besides, they are suitable for other industries with the need of cooling...
    more info
  • Water Chillers, Central Water-cooled [Shini]

    SICC-W series are applicable for cooling moulds which reduce products moulding cycle, also they are available in the cooling of equipment in order to maintain a normal temperature. Besides, they are suitable for other industries in the need of coolin...
    more info